Journal Papers
-
"Numerical and experimental analysis of a high-throughput blood plasma separator for point-of-care applications"
Shadi Karimi,
Mohammad Mojaddam,
Sahand Majidi,
Pouya Mehrdel,
Josep Farré-Llad?s ,
Jasmina Casals-Terré
ANALYTICAL AND BIOANALYTICAL CHEMISTRY,
Vol. 413,
pp.2867-2878,
2021
-
"Vortex dynamics mechanisms of separated boundary layer in a highly loaded low pressure turbine cascade"
Seyed Morteza Sajadmanesh,
Arman Mohseni,
Mohammad Mojaddam
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW,
Vol. 82,
2020
-
"Optimization of the Splitter Blade Configuration and Geometry of a Centrifugal Pump Impeller using Design of Experiment"
Mohammad Namazizadeh,
Moein Talebian gevari,
Mohammad Mojaddam,
Mohammad Vajdi
Journal of Applied Fluid Mechanics,
Vol. 13,
pp.89-101,
2020
-
"Numerical identification of separation bubble in an ultra-high-lift turbine cascade using URANS simulation and proper orthogonal decomposition"
Seyed Morteza Sajadmanesh,
Mohammad Mojaddam,
Arman Mohseni,
Ali Nikparto
AEROSPACE SCIENCE AND TECHNOLOGY,
Vol. 93,
2019
-
"Characterization of the Performance of a Turbocharger Centrifugal Compressor by Component Loss Contributions"
Nima Khoshkalam,
Mohammad Mojaddam,
Keith R. Pullen
Energies,
Vol. 12,
2019
-
"Optimization of a Centrifugal Compressor Using the Design of Experiment Technique"
Mohammad Mojaddam,
Keith R Pullen
Applied Sciences-Basel,
Vol. 2,
pp.1-20,
2019
-
"Design and optimization of meridional profiles for the impeller of centrifugal compressors"
Mohammad Mojaddam,
Mousavi Torshizi S. Abolfazl
Journal of Mechanical Science and Technology,
Vol. 10,
pp.4853-4861,
2017
-
"Experimental and Numerical Flow Field Investigation through Two types of Radial Flow Compressor Volutes"
Mohammad Mojaddam,
EXPERIMENTAL THERMAL AND FLUID SCIENCE,
pp.137-146,
2016
-
"Optimal design of the volute for a turbocharger radial flow compressor"
Mohammad Mojaddam,
A. Hajilouy Benisi,
M. R. Movahhedy
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING,
Vol. 229,
pp.993-1002,
2015
-
"Experimental and numerical investigations of radial flow compressor component losses"
Mohammad Mojaddam,
Ali Hajilouy-Benisi,
S. Abolfazl Moussavi-Torshizi,
Mohammad Reza Movahhedy,
Mohammad Durali
Journal of Mechanical Science and Technology,
Vol. 28,
pp.2189-2196,
2014
-
"Experimental and numerical investigation of radial compressor volute shape effects in characteristics and circumferential pressure non-uniformity"
Mohammad Mojaddam,
,
Scientia Iranica,
Vol. 6,
pp.1753-1764,
2013
-
"investigation of the effect of the geometrical deviations on the performance of a radial flow compressor employing uncertainty qualification and sensitivity analysis"
DAVOOD ALTAFI,
Mohammad Mojaddam,
Behnam Ghadimi
pp.51-63,
2022
-
"Investigation the Aerodynamic Performance of NACA 4412 Airfoil at oscillating inlet stream condition"
Mohammad Ali Gheidi Shahran,
Poyan Hashemitari,
Mohammad Mojaddam
Vol. 2,
pp.177-186,
2021
-
"Design of a Micro-Separator for CTCs Using Hybrid PFF and Dielectrophoresis"
OLYA NORUZ SHAMSIAN,
Arman Mohseni,
Mohammad Mojaddam
Vol. 10,
pp.281-296,
2020
-
"Investigating the Separation Bubble Behavior on the Suction Side of a High-Lift Low-Pressure Turbine Blade Using Proper Orthogonal Decomposition"
Seyed Morteza Sajadmanesh,
Mohammad Mojaddam,
Arman Mohseni
Vol. 19,
pp.2431-2441,
2019
-
"Optimal design of a blade of a small horizontal axis wind turbine (hawt) with considering mechanical constraints"
Seyed mohammad sajad Seifi,
Mohammad Mojaddam,
Poyan Hashemitari
Vol. 05,
pp.405-413,
2018
-
"Optimum Design Fabrication Test of a Radial Flow Compressor Volute"
Mohammad Mojaddam,
Vol. 3,
pp.17-28,
2017
-
"Experimental Numerical Flow Investigation through a Radial Flow Compressor Volute"
Mohammad Mojaddam,
Vol. 28,
pp.1-14,
2017
Conference Papers
-
"Passive Micromixer Parameter Effect Monitoring and Optimization"
Moein Talebian gevari,
Mohammad Mojaddam
7th International Conference on Nanotechnology(ICN-2017),
2017
-
"Performance prediction of a one-stage centrifugal compressor"
Nima Khoshkalam,
Mohammad Mojaddam
24th Annual International Conference on Mechanical Engineering-ISME2012,
pp.1-6,
2016
-
"OPTIMAL DESIGN OF THE VOLUTE FOR A TURBOCHARGER RADIAL FLOW COMPRESSOR"
Mohammad Mojaddam,
Turbine Technical Conference Exposition (ASME Turbo Expo 2014),
2014
-
"EXPERIMENTAL NUMERICAL INVESTIGATION OF LOSSES IN CENTRIFUGAL COMPRESSOR COMPONENTS"
Mohammad Mojaddam
Turbine Technical Conference Exposition (ASME Turbo Expo 2013),
2013
-
"INVESTIGATION ON EFFECT OF CENTRIFUGAL COMPRESSOR VOLUTE CROSS-SECTION SHAPE ON PERFORMANCE AND FLOW FIELD"
Mohammad Mojaddam,
Turbine Technical Conference Exposition (ASME Turbo Expo 2012),
2012
-
"Entropy generation analysis of a turbocharger centrifugal compressor in the range of surge to choke"
DAVOOD ALTAFI,
Mohammad Mojaddam,
Saeid Javadi,
Mansour Mohammadi
12th International Conference on Internal Combustion Engines and Oil,
2022
-
"Performance prediction of a micro horizontal axis wind turbine (HAWT) using blade element momentum(BEM) theory"
Mostafa Zakeri,
Mohammad Mojaddam,
Poyan Hashemitari,
Ali Jahangiri
ISME 2022,
2022
-
"Ferrofluid droplet formation in a co-flowing microchannel in the presence of a uniform magnetic field"
Mehdi Fadayi,
Sahand Majidi,
Mohammad Mojaddam
ISME 2022,
2022
-
"Experimental and numerical investigation of droplet generation using the flow-focusing method"
EHSAN GHAMARI ARBATI,
Mohammad Mojaddam,
Sahand Majidi
ISME 2022,
2022
-
"LowReynolds number flowof non-Newtonian fluids over oscillating cylinders"
Sajjad Bouzari,
Mohammad Mojaddam
ISME2019,
2019
-
""
Mehrdad Kavoosi,
Mohammad Mojaddam,
Arman Mohseni
The 9th National Conference on CFD applications in Chemical and Petroleum Industries,
2018
-
"Performance prediction of a small radial Turboexpander in a organic Rankine Cycle"
Samaneh Esmaeilifar,
Mohammad Mojaddam
12th international energy conference,
2018
-
"Numerical modeling of droplet formation in microfluidic flow focusing device"
Soroush Niazi,
Sahand Majidi,
Mohammad Mojaddam
26th Annual International Conference of Iranian Society of Mechanical Engineers ISME2018,
2018
-
"Flow Simulation Around a High-Lift Blade in a Low-Pressure Gas Turbine Using RANS Equations"
Seyed Morteza Sajadmanesh,
Arman Mohseni,
Mohammad Mojaddam
The 6th National Gas Turbine Conference (GTC96),
2018
-
""
Mohammad Mojaddam,
S. Abolfazl Moussavi Torshizi
5th Iran Wind Energy Conference,
2017
-
""
Mohammad Ali Gheidi Shahran,
Mohammad Mojaddam,
Poyan Hashemitari
5th Iran Wind Energy Conference,
2017
-
"Optimization of the HAWT blade airfoil chord to increase the output power"
Seyed mohammad sajad Seifi,
Mohammad Mojaddam
25th Annual International Conference on Mechanical Engineering,
2017
-
"Centrifugal Compressor diffuser Optimization by the means of DoE methods and RSM"
Moein Talebian gevari,
Mohammad Mojaddam
25th Annual International Conference on Mechanical Engineering,
2017
-
"Optimization of Centrifugal compressor impeller using Dsign of Eperiment method and RSM"
Moein Talebian gevari,
Mohammad Mojaddam
5th National Gas Turbine Conference,
2016
-
"Developing a platform for small HAWT blade design and geometry creation"
Seyed mohammad sajad Seifi,
Mohammad Mojaddam
Second Conference on Modern achievments on Aerospace Mechanics and Related sciences,
2016
-
"Performance Investigation of a Centrifugal Compressor -Part 1 Experimental Study"
Mohammad Mojaddam,
,
2013
-
"Experimental and numerical investigation of radial flow compressor component losses"
Mohammad Mojaddam
,
2013
-
"Study of Volute losses in a centrifugal compressor considering geometrical parameters"
Mohammad Mojaddam,
,
2012
-
"Systematic error analysis for performance prediction of a turbine and compressor of a turbocharger"
Mohammad Mojaddam,
,
2012
