Journal Papers

1. "Controlling chaos in bi-stable energy harvesting systems using delayed feedback control"
   Moein Mohammadpour, Abdessattar Abdelkefi, Pedram Safarpoor, Roghayeh Gavagsaz-ghoachani, Majid ZANDI
   MECCANICA, Vol. 58, pp.587-606, 2023
2. "Nonlinear analysis of torsional vibrations of dual mass flywheel in a three-cylinder engine"
   GHASEM MAGHSOUDI GHAREHBOLAGH, Abbas Rohani Bastami, Pedram Safarpoor, Yaghoub Abbaszadeh
   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, 2022
3. "Fracture behavior, microstructure, and mechanical properties of PA6 / NBR nanocomposites"
   Ali Ghorbankhan, Mohammad reza Nakhaei, Pedram Safarpoor
   POLYMER COMPOSITES, Vol. 43, pp.6696-6708, 2022
4. "Modeling and dynamic analysis of a full flexible shaft-disk-blades system with nonlinear energy sinks (NESs) using modified SAFE diagram"
   Jafar Aghayari, Pedram Safarpoor, Abbas Rahi, Saeed Bab
   Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 44, 2022
5. "Evaluation of the vibration transmitted to pilot's body parts to determine the contribution of different design parameters in deficiency of available seats"
   Ehsan Davoodi, Pedram Safarpoor, Mahdi Pourgholi, Mostafa Khazaee
   International Journal on Interactive Design and Manufacturing, Vol. 16, pp.339-357, 2022
6. "A nonlinear seat suspension with high-static low-dynamic stiffness based on negative stiffness structure for helicopter"
   Ehsan Davoodi, Pedram Safarpoor, Mahdi Pourgholi, Mostafa Khazaee
   JOURNAL OF VIBRATION AND CONTROL, Vol. ., pp.1-21, 2021
7. "Identifying Chaotic Behavior in Non-linear Vibration Energy Harvesting Systems"
   Moein Mohammadpour, Seyed Mohammad Mohsen Modarres Gheysari, Pedram Safarpoor, Roghayeh Gavagsaz-ghoachani, Majid ZANDI
   Renewable Energy Research and Application, Vol. 2, pp.71-80, 2021
8. "Support Parameters Design of Jeffcott Rotor using Nonlinear Energy Sink & H? Method"
   hamidreza heidari, Pedram Safarpoor
   AUT Journal of Mechanical Engineering, Vol. 5, pp.227-238, 2021
9. "The effect of fractional viscoelastic supports on the response of a flexible rotor based on H? and H2 optimization methods"
   Hamidreza Heidari, Habib Ramezannejad, Pedram Safarpoor
   Journal of Mechanics of Materials and Structures, Vol. 16, pp.263-280, 2021
10. "A novel modal vibration reduction of a disk-blades of a turbine using nonlinear energy sinks on the disk"
    Jafar Aghayari, Saeed Bab, Pedram Safarpoor, Abbas Rahi
    MECHANISM AND MACHINE THEORY, Vol. 155, 2021
11. "Design and evaluation of vibration reducing seat suspension based on negative stiffness structure"
    Ehsan Davoodi, Pedram Safarpoor, Mahdi Pourgholi, Mostafa Khazaee
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 234, pp.1-19, 2020
12. "A Novel Modal Vibration Reduction of a Disk-Blades of a Turbine Using Nonlinear Energy Sink on the Disk"
    Jafar Aghayari, saeid bab, Pedram Safarpoor, Abbas Rahi
    MECHANISM AND MACHINE THEORY, Vol. 155, pp.104048-104070, 2020
13. "Effect of Stator dynamics on the Chaotic Behavior of Rotor-Disk-Bearing System under Rub-Impact between Disk and Stator"
    Abbas Rahi, Ahmad Haghani Borujeni, Pedram Safarpoor
    AUT Journal of Mechanical Engineering, Vol. 4, pp.127-148, 2020
14. "Natural Frequency and Dynamic Analyses of Functionally Graded Saturated Porous Beam Resting on Viscoelastic Foundation Based on Higher Order Beam Theory"
    Masoud Babaei, Kamran Asemi, Pedram Safarpoor
    Journal of Solid Mechanics, Vol. 11, pp.615-634, 2019
15. "Edge Fillet Radius Effect on Acoustic Energy in an Ultrasonic Microcontainer for Preparing Nanoemulsion"
    Seyed Mohammad Mohsen Modarres Gheysari, Moein Mohammadpour, Roghayeh Gavagsaz-ghoachani, Pedram Safarpoor, Majid ZANDI
    ACTA ACUSTICA UNITED WITH ACUSTICA, Vol. 105, pp.1243-1250, 2019
16. "H? and H2 optimization procedures for optimal design of support parameters of a flexible rotor"
    Hamidreza Heidari, Pedram Safarpoor
    COMPUTATIONAL and APPLIED MATHEMATICS, Vol. 38, 2019
17. "Ultrasonic nano-emulsification - A review"
    Seyed Mohammad Mohsen Modarres Gheysari, Roghayeh Gavagsaz-ghoachani, Massoud Malaki, Pedram Safarpoor, Majid ZANDI
    ULTRASONICS SONOCHEMISTRY, Vol. 52, pp.88-105, 2019
18. "The effect of support parameters on the force transmissibility of a flexible rotor"
    hamid reza heidari, Pedram Safarpoor
    Iranian Journal of Mechanical Engineering Transactions of the ISME, Vol. 20, pp.29-42, 2019
19. "Buckling and Static Analyses of Functionally Graded Saturated Porous Thick Beam Resting on Elastic Foundation Based on Higher Order Beam Theory"
    Masoud Babaei, Kamran Asemi, Pedram Safarpoor
    Vol. 20, pp.94-112, 2019
20. "Failure Analysis and Remedy Procedure for Cracking of Fuel Nozzles in a Gas Turbine"
    Seyed Ebrahim Moussavi Torshizi, Pedram Safarpoor
    Journal of Failure Analysis and Prevention, Vol. 18, pp.322-329, 2018
21. "Identification of Asynchronous Blade Vibration Parameters by Linear Regression of Blade Tip Timing Data"
    Abbas Rohani Bastami, Pedram Safarpoor, Arash Mikaili, Mohammad Mohammadi
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, Vol. 140, 2018
22. "Analytical and numerical investigations of the crack behavior in thermal barrier coatings under the trip thermal load"
    Ali Ghaseminezhad Kooshali, Mahmood Sameezadeh, Majid Vaseghi, Pedram Safarpoor
    SURFACE and COATINGS TECHNOLOGY, Vol. 337, pp.90-96, 2018
23. "Optimal design of support parameters for minimum force transmissibility of a flexible rotor based on H and H2 optimization methods"
    Hamidreza Heidari, Pedram Safarpoor
    ENGINEERING OPTIMIZATION, Vol. 50, pp.671-683, 2017
24. "Analytical approach to calculate bending longitudinal and torsional local stiffness of an asymmetric circumferential crack with contact condition"
    Mojtaba Meydan Sharghi, Seyyed Majid Yad Avar Nikravesh, Pedram Safarpoor
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, Vol. 94, pp.448-463, 2017
25. "Modeling and simulation of thermal fatigue crack in EB-PVD TBCs under non-uniform temperature"
    Ali Ghaseminezhad Kooshali, Mahmood Sameezadeh, Majid Vaseghi, Pedram Safarpoor
    CERAMICS INTERNATIONAL, Vol. 43, pp.13140-13145, 2017
26. "Design and modeling of a novel active squeeze film damper"
    , Pedram Safarpoor
    MECHANISM AND MACHINE THEORY, Vol. 105, pp.235-243, 2016
27. "A study on tensile properties of a novel fiber/metal laminates"
    Seyed Ebrahim Moussavi Torshizi, Soheil Daryooshi, mojtaba sedighi, Pedram Safarpoor
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.4920-4925, 2010
28. "Identification of single and multiple cracks in a cylindrical shell using modal analysis and wavelet transform"
    SHAHROOZ SAMIMIAN TEHRANI, Pedram Safarpoor, Masoud Babaei, Faraz Kiarasi
    Vol. 12, pp.13-28, 2022
29. "Experimental study the effects of halloysite nanoparticles and acrylonitrile butadiene rubber elastomer on mechanical properties of PVC/NBR/HNT nanocomposites"
    Sohrab Piri cheshnasar, Mohammad reza Nakhaei, Pedram Safarpoor, Ghasem Naderi
    Journal of Science and Technology of Composites, Vol. 8, pp.1492-1502, 2021
30. "Modeling, design and analysis of seat suspension based on negative stiffness structure in order to improve the vibration environment of the helicopter pilot"
    Ehsan Davoodi, Pedram Safarpoor, Mahdi Pourgholi, Mostafa Khazaei
    Vol. 53, pp.2513-2538, 2021
31. "Modeling and optimization of mechanical properties of PA6/NBR nanocomposite reinforced with perlite nanoparticle"
    Ali Ghorbankhan, Mohammad reza Nakhaei, Pedram Safarpoor
    Journal of Science and Technology of Composites, Vol. 8, pp.1421-1430, 2021
32. ""
    Moein Mohammadpour, Shirin Baqeri kazazi, Pedram Safarpoor, Roghayeh Gavagsaz-ghoachani, Majid ZANDI
    Vol. 2, pp.1-14, 2021
33. "Investigation of Corner Radius Effect in a Piezoelectric Ultrasonic Microcontainer to Improve Nanoemulsion Stability"
    Seyed Mohammad Mohsen Modarres Gheysari, Roghayeh Gavagsaz-ghoachani, Pedram Safarpoor, Majid ZANDI
    Vol. 52, pp.1005-1022, 2020
34. "Vibration Amplitude Reduction of the Disk-Blade System Using the Energy Absorbers Mounted on the Disk"
    Jafar Aghayari, Pedram Safarpoor, Abbas Rahi, Saied Bab
    Vol. 20, pp.391-402, 2020
35. "Optimum reduction of vibrations of the flexible shaft-disc-blade system using a set of nonlinear energy sinks on the disc"
    Jafar Aghayari, Pedram Safarpoor, Abbas Rahi, Saied Bab
    Vol. 50, pp.525-532, 2019
36. "Analytical and finite element investigations of trip effect on thermal stress and strain and crack growth in TBCs"
    Majid Vaseghi, Mahmood Sameezadeh, Pedram Safarpoor, Ali Ghaseminezhad Kooshali
    Vol. 14, pp.29-38, 2018
37. "The effect of piezoelectric arrangement on the acoustic energy density in the micro ultrasonic chamber of nanoemulsion preparation"
    Seyed Mohammad Mohsen Modarres Gheysari, Pedram Safarpoor, Majid ZANDI
    Vol. 8, pp.15-28, 2018
38. "Comparing performance of two different pneumatic circuits in the presence of controllers with optimal parameters"
    Vahideh Vahidifar, Mostafa Taghi zadeh, Vahid Fakhari, Pedram Safarpoor
    Vol. 18, pp.242-252, 2018
39. "Multi-objective optimization of output power and stability of a free piston Stirling engine using genetic algorithm"
    Meysam Elyasi, Vahid Fakhari, Pedram Safarpoor
    Vol. 18, pp.541-551, 2018
40. ""
    Mahdi Hassanzadeh, Pedram Safarpoor
    Vol. 18, pp.645-654, 2018
41. ""
    Abbas Rahi, Ahmad Haghani Borujeni, Pedram Safarpoor
    Vol. 48, pp.119-127, 2018
42. ""
    Masoud Nourimotlagh, Pedram Safarpoor, Mahdi Pourgholi
    Vol. 12, pp.175-185, 2017
43. "Dynamic modeling and control of a quadrotor using nonlinear approaches based on MEMS sensors experimental data"
    Ehsan Davoodi, Mahmoud Mazare, Pedram Safarpoor
    Vol. 16, pp.31-41, 2016
44. ""
    Mahdi Safaee, Mohammad Javad Mahmoodi, Pedram Safarpoor
    Vol. --, pp.1-9, 2014
45. "Determining the limit load of cracked parts by linear elastic finite element analysis and its application in estimating the life of hot components based on fracture mechanics"
    Pedram Safarpoor, majid mirzaei
    International Journal of Industrial Engineering and Production Research, Vol. 14, pp.257-272, 2003

Conference Papers

1. "Effect of halloysite nanotube and acrylonitrile butadiene rubber elastomer on the tensile strength of PVC/NBR/HNT nanocomposite"
   Sohrab Piri cheshnasar, Mohammad reza Nakhaei, Pedram Safarpoor, Ghasem Naderi
   14th International Seminar on Polymer Science and Technology (ispst), pp.63-64, 2020
2. "Study and modeling of contact in rolling bearings"
   amir rastin shendi, Pedram Safarpoor
   The 31th Annual International Conference of Iranian Society of Mechanical Engineers & 9th Conference on Thermal Power Plants, 2023
3. ""
   Seyyed amir hossein Mousavi, Roohollah Sarfaraz Khabbaz, Pedram Safarpoor
   The 28th annual conference of the Iranian Society of Mechanical Engineers (ISME2020), pp.5-8, 2020
4. "A review of signal analysis methods for defect monitoring in rolling bearings by acoustic emission method"
   Ramtin Tabatabaee, Seyed Mohammad Jafari, Pedram Safarpoor
   , 2019
5. "Transverse Vibration modelling of a beam under motion of several accelerated mass using ABAQUS"
   Ramtin Tabatabaee, Pedram Safarpoor
   , 2019
6. "Experimental investigation of defect in rolling bearings by acoustic emission using wavelet transform"
   Ramtin Tabatabaee, Seyed Mohammad Jafari, Pedram Safarpoor
   , 2019
7. "Dynamic stability analysis for vehicle nonlinear suspension using multiple time-scale mehod"
   Reza Yarmohammadi, Pedram Safarpoor
   , 2018
8. "Curvature edge effect parametric study on volumetric cavitation in an ultrasonic bath for nanoemulsion product"
   Seyed Mohammad Mohsen Modarres Gheysari, Moein Mohammadpour, Roghayeh Gavagsaz-ghoachani, Pedram Safarpoor, Majid ZANDI
   , 2018
9. "Detecting Chaos in Bi-Stable Energy Harvester Using Largest Lyapunov Exponent"
   Moein Mohammadpour, Seyed Mohammad Mohsen Modarres Gheysari, Pedram Safarpoor, Roghayeh Gavagsaz-ghoachani, Majid ZANDI
   , 2018
10. "Porous media functional material graded thick beam buckling analysis"
    Masoud Babaei, Pedram Safarpoor, kamran asemi
    , 2018
11. "Porous media functional material graded thick beam static analysis on elastic support"
    Masoud Babaei, Pedram Safarpoor, kamran asemi
    , 2018
12. "Evaluation of an open source digital image correlation program for surface strain field measurement"
    Amirreza Zarei aziz, Roohollah Sarfaraz Khabbaz, Pedram Safarpoor
    26th Annual International Conference of Iranian Society of Mechanical Engineers ISME2018, 2018
13. "Parametric Study of Factors Affecting the Output Power and Stability of a Free-Piston Stirling Engine"
    Meysam Elyasi, Vahid Fakhari, Pedram Safarpoor
    10th International Conference on internal combustion Engines and Oil, pp.1-10, 2018
14. "Design of controllers with optimum coefficients for position control of a pneumatic actuator with on/off solenoid valve"
    Vahideh Vahidifar, Mostafa Taghi zadeh, Vahid Fakhari, Pedram Safarpoor
    psc2017, pp.1-7, 2017
15. ""
    Abbas Rohani Bastami, Mohammad Mohammadi, Arash Mikaili, Pedram Safarpoor
    , 2017
16. "Fault Diagnosis and Vibration Study for Baldes by Bladed Tip Timing"
    Arash Mikaili, Mohammad Mohammadi, Pedram Safarpoor, Abbas Rohani Bastami
    , 2016
17. ""
    Ali Ghaseminezhad Kooshali, Pedram Safarpoor, Mahmood Sameezadeh, Majid Vaseghi
    2nd International onference on New research Achivements in Mechanics Industrial Aerospace Engineering, 2016
18. "Investigation of performance and simulation of shunt piezoelectric damper for passive control of vibration"
    Pedram Safarpoor,
    6th Conference on Thermal Power Plants CTPP2016(Gas Combined-Cycle Steam), pp.193-201, 2016
19. "Design of Rotor Supports Based on rthe Vibration Absorbers"
    Pedram Safarpoor
    6th Conference on Rotating Equipment in Oil Power Industries, 2015
20. "Study for the effect of start up acceleration on the vibration response of rotors during passing critical speeds"
    Pedram Safarpoor,
    8th Iranian Student Conference on Mechanical Engineering, 2014
21. "Dynamic parameters optimization for rotor-bearing systems using genetic algorithm and PSO"
    Ashkan Jamshidi, Pedram Safarpoor
    5th conference on thermal power plants, 2014
22. "Stability analysis in anisotropic rotor bearing systems"
    Mohammad Alijani, Pedram Safarpoor
    National conference on Mechanical Engineering, 2013
23. "Numerical simulation of gas turbine tubular combustion chamber and parametric study on NOx production"
    Ahad Nemati, Ahmad Fasih Far, Pedram Safarpoor
    The 2nd Natinal Gas Turbine Conference, 2013
24. "Decenteralized and centeralized control of rigid rotor on active magnetic bearing"
    Alborz Niknam, Pedram Safarpoor, Mahdi Pourgholi
    , 2013
25. "Alford Thomas force effect study on the vibration of axial flow turbomachines"
    mohammad rezaei, Pedram Safarpoor
    3rd Conference on Rotating Equipment in Oil Power Industries (Iran Rotate 2011), 2012
26. "Numerical determination of journal bearings stiffness and damping coefficients"
    mohsen heidar, Pedram Safarpoor
    3rd Conference on Rotating Equipment in Oil Power Industries (Iran Rotate 2011), 2012
27. "Dynamic simulation of flexible rotor on active magnetic bearings"
    alborz nicknam, Pedram Safarpoor
    3rd Conference on Rotating Equipment in Oil Power Industries (Iran Rotate 2011), 2012
28. "Methodologies in on-line life assessment of hot section components under varying operating conditions(GTF approaches vs RSM approach)"
    mehdi gafari, Pedram Safarpoor
    , 2011
29. "Morton effect and its detection in vibration problems of turbomachine rotor bearing systems"
    aziz mohammad gharanjik, Pedram Safarpoor
    , 2010
30. "Online life prediction of creep-fatigue for rotating blades of TM Turbochager turbine"
    mehdi jafari, Pedram Safarpoor
    , 2009
31. "Study and comparison between methods of component FRFs coupling and mode synthesis"
    mohammad javad kokabi, hossen mohamad navazi, Pedram Safarpoor
    , 2009
32. "A study on the non impirical methods for calculation of gas turbine and compressor blades natural frequencies made of metal based composites"
    Pedram Safarpoor, hamed raeisi
    , 2009
33. "Intelligent fault diagnosis of vehicle gearbox by vibration analysis using wavelet"
    aidin ghafarnezhad, morteza homayoun sadeghi, Pedram Safarpoor
    , 2009
34. "Dynamic analysis of rotating shafts in bending using finite element method and software development"
    mehdi bakhtiyari, Pedram Safarpoor
    , 2008
35. "Finite element modelling of power plant rotors straightening by local heating"
    Seyed Ebrahim Moussavi Torshizi, hosein mohamadian, Pedram Safarpoor
    , 2008
36. "Gas turbine blade natural frequency determination by finite element method"
    Pedram Safarpoor
    , 2001
37. "Jet condensers optimization in Heller indirect dry cooling systems"
    alireza elhagh, hmidreza ghorbani, Pedram Safarpoor
    15th international power system conference, 2000
38. "Stress analysis in the cracking failure analysis of Ghom power plant Mitsubishi gas turbine nozzles using finite element method"
    Pedram Safarpoor, Seyed Ebrahim Moussavi Torshizi, Mohammad Javad Moosa Mayali
    , 1999