Mohammad Ameri

Professor

Update: 2024-12-26

Mohammad Ameri

Mechanical and Energy Systems Engineering /

Master Theses

  1. Feasibility of ambient air vaporizer for a moving nitrogen capsule charger unit
    Alireza Karamzade 2024
  2. Improving the efficiency of heat exchangers network with Combined Pinch and Exergy Analysis (CPEA): A case study of gas refinery
    Saba Arshizadeh 2024
  3. Molecular dynamics simulation and analysis of the phase change materials behavior inside annular spaces with different cross-sections
    Erfan Zeraati 2024
  4. Thermo, exergy, economic and environmental analysis of solar chimney equipped with Forgo heat exchangers replaced instead of Heller tower in fossil fuel power plant
    Fatemeh Mohammadi 2024
  5. Development of rheological models dependent on time, temperature and pressure of drilling cement
    Mehdi Saffari 2024
  6. Numerical investigation of humidity and condensation reduction in steam turbine blades using hot steam injection and surface heating
    Leyla Iraj 2024
  7. Development of Night Power Generating Device using Radition Cooling and Thermoelectric Generator
    Majid Salehi 2023
  8. Validation, design and construction of air water harvester with energy consumption improvement using peltier and seebeck effects
    Ali Nosrati 2023
  9. Molecular dynamic simulation of melting and solidification process of phase change materials in annular space
    Kiarash Raiszadeh Mousavian 2023
  10. Experimental investigation on heat transfer enhancement and pressure drop in nanofluid flow inside the pipe with deep dimples
    Alireza Khashaei 2023
  11. ?CO?_2 capturing from combustion production of biomass-based CHP power plant for utilizing in a greenhouse
    Seyedeh Pegah Lari 2023
  12. Design and thermo-economic analysis of a multi-purpose power generation system with multi-objective optimization in a gas pressure reducing station
    Amir Qatarani Nejad 2022
  13. Feasibility study of improving the performance of condensers by using novel hydrophobic coatings on the surface of condenser tubes
    Mohammad Nikjah Bakhshayesh 2022
  14. Numerical simulation of non-Newtonian fluid flow using the lattice Boltzmann method with microscale application
    Nima Ramezani 2022
  15. Numerical simulation of corrosion phenomenon in multiphase pipelines
    Mohammad Veyskarami 2022

  16. MohammadAmin Tarahomi 2022

  17. HAMED KAZEMI VARNAMKHASTI 2022
  18. Energy, Exergy and economic analyses of recovery wastewater in a combined cycle power plant and it’s optimization
    Farzad Asadi 2022
  19. Using Thermal waste Energies of Power Plant for Designing a Greenhouse and Energy, Exergy, Economic and Environmental (4E) Analysis
    Ali Saedi 2022
  20. Investigation of the effect of geometric parameters on heat transfer process of PCM in triplex tube heat exchanger
    Ali Moradian 2021
  21. Experimental analysis of a portable atmospheric water generator by thermoelectric cooling method
    Mohammadreza Akbarpour Bazargani 2021
  22. Performance optimization of a single-stage axial compressor with a multi-objective function
    Shahryar Sharifi 2021
  23. Feasibility of increasing the rate of free heat convection within a closed compartment with floor heating using rotation
    Mojtaba Sedaghat 2021
  24. The feasibility and evaluation of the performance of the dry cooler system in thermal power plants by inserting the ACC inside the Heller cooling tower
    Hesel Gharehbaei 2020
  25. Feasibility study and Investigation Exergy Economic Analysis of co2 capturing system of the flue gass injection into natural draft dry cooling tower in sample power plant
    Atefeh Sharif 2020
  26. Investigation of A novel Hybrid Cooling System(Heller-ACC) and Feasibility, Energy ,Exergy and Economic Analysis Of A Typical Power Plant with new Cooling System
    Reza Alizadeh kheneslu 2020

  27. Sepideh Zeynalnezhad 2019

  28. Mostafa Tahmasbi 2019

  29. Mohammad Ahmadi 2019

  30. Saman InanlooShavikloo 2019
  31. Numerical analysis of heat transfer from nanofluid flowing in a dimpled tube
    AtaOllah Firoozi 2019
  32. Technical Environmental analysis of Production and Consumption and Recycling of Steel in the Community by input-Output Table
    Sattar Zavvari 2019

  33. Abbas Arebi 2019
  34. Development and improvement of a semi-empirical friction factor model at the interface between two-phase liquid and gas flow
    Mahdi Gharehasanlou 2018

  35. Arian Gerami 2018

  36. Mehdi Karimi 2018

  37. Keivan Salimi 2018

  38. Arezoo Almasi Sorkhe Mehrai 2018

  39. Samira Mohammadi 2018

  40. Behrooz Adelshahian 2017

  41. Behzad Tabrizi Varzeghani 2017

  42. AMIN BAKHTIARI 2017

  43. Somayeh Dezham 2017

  44. Mohammad Reza Ardekani Fard 2017

  45. Mojtaba Dargahi Kourabbaslou 2016

  46. Nima Tirandaz 2016

  47. Peyman Dorraj 2016

  48. Elnaz Hariri 2016

  49. Zahra Darakeh 2016

  50. Mahyar Seyd Eshaghi 2015

  51. Saeed Akbarnejad 2015

  52. Armin Sargholi 2015

  53. Zahed Besharati 2015

  54. Ahmadreza Farshad 2014

  55. Hamid Mokhtari 2014

  56. Mohammad Jorjani 2014

  57. Mojtaba Yoosefi 2014

  58. Alireza Bafandeh 2014

  59. Mohammad Barzegar Kaliji 2014

  60. Behnam Talaei Dana 2014

  61. Nooshin Enadi 2013

  62. Alireza Heydari 2013